Adrenlinerush Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Setting up lirc and evdev on Le Potato ======

  * Make sure that the kernel module is loaded **meson_ir** (Its in their kernel by default and if you use their config for a custom kernel)
  * Install Dependencies<code>
emerge --ask media-tv/v4l-utils app-misc/lirc dev-python/python-evdev app-misc/evtest
</code>
  * Modprobe kernel modules<code>
modprobe -a ir-nec-decoder ir-rc5-decoder ir-rc6-decoder ir-jvc-decoder ir-sony-decoder ir-rc5-sz-decoder ir-sanyo-decoder ir-mce_kbd-decoder ir-lirc-codec
</code>
  *Get keycodes for each button on your remote<code>
ir-keytable -c -p NEC,RC-5,RC-6,JVC,SONY -t</code>
  * press buttons and make a list of buttons, keycodes and protocol from output similar to below<code>
lirc protocol(nec): scancode = 0x40
</code>
  * using the information you gathered created make remote definition [[https://github.com/torvalds/linux/blob/master/include/uapi/linux/input-event-codes.h:Valid Keycodes]]<code>
austin@mobilemouse ~/mocp_i2c_lcd_ir_remote $ cat /lib/udev/rc_keymaps/my_remote.toml
[[protocols]]
name = "My_Remote"
protocol = "nec"
variant = "nec32"

[protocols.scancodes]
0x45 = "KEY_POWER"
0x46 = "KEY_MODE"
0x47 = "KEY_MUTE"

0x44 = "KEY_PLAYPAUSE"
0x40 = "KEY_BACK"
0x43 = "KEY_FORWARD"

0x07 = ""
0x15 = "KEY_VOLUMEDOWN"
0x09 = "KEY_VOLUMEUP"

0x16 = "KEY_0"
0x19 = "KEY_SHUFFLE"
0x0d = ""

0x0c = "KEY_1"
0x18 = "KEY_2"
0x5e = "KEY_3"
0x08 = "KEY_4"
0x1c = "KEY_5"
0x5a = "KEY_6"
0x42 = "KEY_7"
0x52 = "KEY_8"
0x4a = "KEY_9"
</code>
  * Clear the keytable and test with your config file<code>
ir-keytable -c -w /lib/udev/rc_keymaps/my_remote.toml -t
</code>
  * Add the remote def to /etc/rc_maps.cfg<code>
#driver table                    file
*       *                        my_remote.toml
</code>
  * Load it on boot
    * create service <code>
mobilemouse /etc/init.d # cat irkeytable
#!/sbin/openrc-run
# Copyright 2023 Gentoo Authors
# Distributed under the terms of the GNU General Public License v2

name="irkeytable"
description="add irkeytable config"

start() {
    /usr/bin/ir-keytable -a /etc/rc_maps.cfg -s rc0
}
</code>
    * add to default run level<code>
rc-update add irkeytable default
</code>
  * Add any modules that you might need to autoload (my case was: ir-nec-decoder and ir-lirc-codec)<code>
echo "ir-nec-decoder\nir-lirc-codec" >> /etc/modprobe.d/lirc.conf
</code>
  * Reboot to verify its good and test with evtest<code>
austin@mobilemouse ~/mocp_i2c_lcd_ir_remote $ evtest
No device specified, trying to scan all of /dev/input/event*
Not running as root, no devices may be available.
Available devices:
/dev/input/event0:      Solid State System Co.,Ltd. USB PnP Audio Device
/dev/input/event5:      meson_ao_cec
/dev/input/event6:      meson-ir
Select the device event number [0-6]: 6
Input driver version is 1.0.1
Input device ID: bus 0x19 vendor 0x0 product 0x0 version 0x0
Input device name: "meson-ir"
Supported events:
  Event type 0 (EV_SYN)
  Event type 1 (EV_KEY)
    Event code 2 (KEY_1)
    Event code 3 (KEY_2)
    Event code 4 (KEY_3)
    Event code 5 (KEY_4)
    Event code 6 (KEY_5)
    Event code 7 (KEY_6)
    Event code 8 (KEY_7)
    Event code 9 (KEY_8)
    Event code 10 (KEY_9)
    Event code 11 (KEY_0)
    Event code 113 (KEY_MUTE)
    Event code 114 (KEY_VOLUMEDOWN)
    Event code 115 (KEY_VOLUMEUP)
    Event code 116 (KEY_POWER)
    Event code 158 (KEY_BACK)
    Event code 159 (KEY_FORWARD)
    Event code 164 (KEY_PLAYPAUSE)
    Event code 373 (KEY_MODE)
    Event code 410 (KEY_SHUFFLE)
  Event type 2 (EV_REL)
    Event code 0 (REL_X)
    Event code 1 (REL_Y)
  Event type 4 (EV_MSC)
    Event code 4 (MSC_SCAN)
Key repeat handling:
  Repeat type 20 (EV_REP)
    Repeat code 0 (REP_DELAY)
      Value    400
    Repeat code 1 (REP_PERIOD)
      Value     80
Properties:
  Property type 5 (INPUT_PROP_POINTING_STICK)
Testing ... (interrupt to exit)
</code>
  * Once evtest is working you can code against it: [[https://github.com/adrenlinerush/mocp_i2c_lcd_ir_remote/blob/master/mocp_ir_daemon.py|My Example controlling moc]]
Adrenlinerush Wiki

User Tools

Site Tools

Page Tools
