Differences
This shows you the differences between two versions of the page.
| Both sides previous revisionPrevious revisionNext revision | Previous revision |
| orangepi_800 [2024/02/19 22:52] – [Kernel...] austin | orangepi_800 [2024/09/22 22:08] (current) – external edit 127.0.0.1 |
|---|
| The module compiles and loads but isn't really functional now. | The module compiles and loads but isn't really functional now. |
| |
| The orangepi ubuntu based image uses this [[https://github.com/orangepi-xunlong/linux-orangepi/tree/orange-pi-5.18|kernel(5.18)]]. Its slightly newer. I couldn't get it to work with module compression. It threw an error whenever trying to load a module. Which is really weird as I initially just copied the kernel and modules from the image and it works fine with their image. Something must prevent this from working with the openrc-stage3 from Gentoo but I didn't dig real deep into this. After recompiling without module compression it works other than rfkill.ko appears to hang when loading on boot (required by sprdwl_ng) but eventually completes loading and works fine so I've switched to this kernel for the time being. | The orangepi ubuntu based image uses this [[https://github.com/orangepi-xunlong/linux-orangepi/tree/orange-pi-5.18|kernel(5.18)]]. Its slightly newer. I couldn't get it to work with module compression(enabled with XZ compression in the image). It threw an error whenever trying to load a module. Which is really weird as I initially just copied the kernel and modules from the image and it works fine with their image. Something must prevent this from working with the openrc-stage3 from Gentoo but I didn't dig real deep into this. After recompiling without module compression it works other than rfkill.ko appears to hang when loading on boot (required by sprdwl_ng) but eventually completes loading and works fine so I've switched to this kernel for the time being. |
| |
| Found more recent [[https://github.com/zhangn1985/linux-stable|source(6.8-rc2)]]. It compiles and I get video output but it hangs on first daemon load. This is going to require some more work. | Found more recent [[https://github.com/zhangn1985/linux-stable|source(6.8-rc2)]]. It compiles and I get video output but it hangs on first daemon load. This is going to require some more work. |
